Location Of Controls; Power Connection; Radio Operation - AudioSonic CL-1470 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11

Location of controLs

1. ALARM OFF button
2. TIME SET button
3. ALARM SET button
4. SNOOZE button
5. HOUR SET button
6. MINUTE SET button
7. SLEEP button
8. VOLUME / BUZZ button
9. TUNING button
10. CLOCK DISPLAY
11. AUTO INDICATOR
12. RATING LABEL (bottom of unit)
13. BATTERY COMPARTMENT
14. ON / OFF / AUTO switch
15. AC POWER CORD
16. FM ANTENNA
17. AM / FM BAND switch
1
2
3
14
13
12
11
17
15
16
4
5
6
7
9
10

Power connection

Plug the AC POWER CORD (15) to the household outlet. Make sure the voltage is
correct for safety purposes and prevent plausible damages to the set. Connect one
9V battery (not included) to the battery terminals in the BATTERY COMPARTMENT
(13). It maintains the clock continue function whenever the AC power is
interrupted.
Please note: the display will not exhibit time during power failure, but the clock
will keep correct time.

radio oPeration

1. Slide the ON / OFF / AUTO switch (14) to the ON position
2. Slide the AM / FM BAND switch (17) to the desired waveband.
3. Tune to the desired station with the TUNING button (9).
4. Adjust the volume level with the VOLUME / BUZZ button (8).
5. To obtain a better FM reception, lay out the FM ANTENNA (16) wire to it's full extent.
6. The radio can be switched off by sliding the ON / OFF / AUTO button (14) to
the "OFF" position.
setting the time
• Press the TIME SET button (2) at the same time together with the HOUR SET
button (5) for hour setting or the MINUTE SET button (6) for minute setting.
setting the alarm
• Press the ALARM SET button (3) at the same time together with the HOUR SET
button (5) for hour setting or the MINUTE SET button (6) for minute setting.
• Select the type of alarm (RADIO or BUZZER) and slide the ON / OFF / AUTO
switch (14) to the "AUTO" position.
8
RADIO: Wake to the radio, the radio must be tuned to a station which will be
broadcasting at the alarm time with the TUNING button (9) and the volume must
be adjusted to the desired level with the VOLUME / BUZZ button (8).
BUZZER: Wake to the buzzer, slide the VOLUME / BUZZ button (8) to it's minimum
(in BUZZ position).
EN
Instruction Manual
3

Publicidad

Tabla de contenido
loading

Tabla de contenido