Honda TILLER F560 Manual De Explicaciones página 18

2. Transmission oil
Place the tiller on a level surface and remove the oil filler cap.
The oil should be level with the lower edge of the oil filler hole.
Add oil same as the engine oil (see page
TRANSMISSION OIL FILLER CAP
OIL FILLER HOLE
3. Air cleaner
Open the engine upper cover, and remove the air cleaner cover (see
page 41 and 42
Check the air cleaner element to be sure it is clean and in good
condition. Clean or replace the element if necessary (see page
Never run the engine without the air cleaner. Rapid engine wear will
result.
ELEMENTS
AIR CLEANER COVER
).
14 ) if the level is low.
LOWER EDGE OF THE OIL FILLER HOLE
UPPER LIMIT
42 ).
15