Initial Settings - Toshiba TCB-IFGSM1E Manual Del Propietário

TCS-NET GSM Phone Control Interface
4

Initial settings

• Make the following settings on your GSM mobile phone.
• In the following example, you do not need to enter the < and > symbols. You just enter the value
enclosed in < and >.
• The phone number specified at SETPERMIT is the phone number to control an air conditioner which
is connected to the GSM Modem. Enter the telephone number as <GSM phone number> or <"+" +
"Country code" + "GSM phone number" (omit the first zero of the GSM phone number, if it starts from
zero)> for domestic transmission, or <"International access code" + "Country code" + "GSM phone
number" (omit the first zero of the GSM phone number, if it starts from zero)> for international
transmission. For the details, ask your mobile network operator.
• It replies to the SETPERMIT, INFOTEL commands and the operations to the air conditioner from
mobile by sending SMS messages to the phone number specified at INFOTEL. Enter the telephone
number as <GSM phone number> or <"+" + "Country code" + "GSM phone number" (omit the first zero
of the GSM phone number, if it starts from zero)>. "+" + Country code may not be necessary for local
transmission. For the details, ask your mobile network operator.
• NAME can be up to 19 characters of English alphabets and Arabic numerals (spaces cannot be
included).
NOTE
Maximum length of SMS is 160 characters. Pay attention on it when you set SETPERMIT, INFOTEL or
NAME at first time.
When your message becomes more than 160 characters long, divide it into plural SMS to send.
(a) Create an SMS message for setting the setting
permitted GSM phone number of the target air
conditioner.
SETPERMIT
Enter the GSM phone number in < > as a
string of numbers. Space character can be
included.
Up to five GSM phone numbers can be entered
by inserting a new line at the end of the
message above.
SETPERMIT
SETPERMIT
SETPERMIT
5-EN
When a PIN is provided, be sure to enter it in
<***> before <GSM phone number>. PIN is a
4-digit to 8-digit code. Space character can be
included. Be sure to enter PIN for all GSM
phone numbers.
SETPERMIT
SETPERMIT
SETPERMIT ***
– 6 –
Owner's Manual
***
***