Cleaning And Maintenance; Technical Specifications - Luxibel LX104 Manual Del Usuario

12-Channel Mode
channel LED
1 all
2 all
3 1
4 2
5 3
6 4
7 5
8 6
9 7
10 8
11 9
12 10
8.

Cleaning and maintenance

•
All screws should be tight and free of corrosion.
•
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections...
•
Mechanically moving parts must not show any signs of wear and tear.
•
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
•
Regularly remove dust from the housing and the air vents using a slightly damp cloth.
•
There are no user-serviceable parts inside. Refer to an authorized dealer for service and/or spare
parts.
Fuse Replacement
1. Wedge the fuse holder [6] out of its housing with a flat-head screwdriver.
2. Remove the damaged fuse from its holder and replace with exact same type of fuse.
3. Insert the fuse holder back in its place and reconnect power.
9.

Technical Specifications

power supply
power consumption
LED
luminous flux
beam angle
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.luxibel.com.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
V. 01 – 06/06/2012
LX104/LX105
from to
000 255
000 009
010 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
LX104
230VAC ~ 50Hz
37W
10 x CREE® 3W warm white
1050 @ 1m
140°
1060 x 58 x 148mm
3.5kg
description
dimmer 0 ~ 100%
no function
strobe slow ~fast (max. 20Hz)
dimmer 0 ~ 100%
dimmer 0 ~ 100%
dimmer 0 ~ 100%
dimmer 0 ~ 100%
dimmer 0 ~ 100%
dimmer 0 ~ 100%
dimmer 0 ~ 100%
dimmer 0 ~ 100%
dimmer 0 ~ 100%
dimmer 0 ~ 100%
9
LX105
230VAC ~ 50Hz
37W
10 x CREE® 3W cold white
1200 @ 1m
140°
1060 x 58 x 148mm
3.5kg
©Velleman nv