3.1 Receiving and Inspecting the Equipment
The equipment is supplied in a sturdy wooden crate designed to be moved using a forklift truck or pallet truck. On delivery of the equipment check
the crate and its contents for damage and verify that the following items have been included with the dryer. If there are any signs of damage to the
crate please inform the delivery company immediately and contact your local Parker domnick hunter office.
3.1.1 Storage
The equipment should be stored, within the packing crate, in a clean dry environment. If the crate is stored in an area where the environmental
conditions fall outside of those specified in the technical specification, it should be moved to its final location (installation site) and left to stabilise
prior to unpacking. Failure to do this could cause condensing humidity and potential failure of the equipment.
3.1.2 Unpacking
The panels of the crate are secured using nails. Starting with the top, carefully remove each panel in turn and store them safely for future use.
3.1.3 Lifting and Handling
The purifiers are heavy and should be lifted into position using suitable lifting equipment. Lifting pockets have been provided on the BA-DME050-
E - 080-E modules to facilitate lifting with a fork lift truck.
3.2 Overview of the Equipment
Key:
Ref
Description
Compressed Air Inlet Port
1
General Purpose Coalescing Filter
Double stage Activated Carbon filter
2
(Includes high efficiency coalescing element)
3
PNEUDRI Compressed Air Dryer
Double stage Hopcolite filter
4
(Includes high efficiency coalescing element)
(1) The pressure gauges and sight glass moisture indicator are for indication only. The crystals in the outlet sight glass moisture indicator should be orange for correct operation.
If the crystals change colour to white, the BA-DME-E is producing a wetter dewpoint than required and the cause MUST be investigated immediately.
Ref
Description
Outlet Port
5
Catalyst Filter
6
High Efficiency Dust filter
7
Moisture Indicator
8
Pressure Gauges
8
(1)
(1)