Parker BA-DME012 Guia Del Usuario página 21

Recommended every 36 months
Valves
Note. We recommend a visual inspection of the solenoid valve membranes every 12months. If required the membranes should be replaced using
the following kits: N/O Inlet valve membrane kit (Part No. 90 000 0101), N/C Exhaust valve membrane kit (Part No. 90 000 0105)
Note. We recommend a visual inspection of the solenoid valve membranes every 12months. If required the membranes should be replaced using
the following kits: N/C Exhaust valve membrane kit (Part No. 90 000 0105).
Deisccant
Note. The quantity of desiccant material required is dependent upon the model of dryer and the specified dewpoint as illustrated below.
Ensure that the dryer is filled using a Snowstorm filler and replace the column seals.
Column Seal Kits
Note. One kit is required for each dryer.
Snowstorm Filler
Description
Valve Overhaul
(BA-DME012-E - 040-E)
Description
Valve Overhaul
(BA-DME050-E - 080-E)
Description
Desiccant AA
BA-DME012-E - 015-E BA-DME020-E - 040-E
x1
Description
Column Seals
(BA-DME012-E - 040-E)
Description
Column Seals
(BA-DME050-E - 080-E)
Description
Snowstorm Filler
(BA-DME012-E - 040-E)
Snowstorm Filler
(BA-DME050-E - 080-E)
Catalogue No.
608330014
Catalogue No.
608330015
Catalogue No.
608203661
BA-DME050-E
x2 x3
Catalogue No.
608203733
Catalogue No.
608330010
Catalogue No.
608200622 Maxi / Midi Snowstorm Filler
608201051
Jumbo Snowstorm Filler
17
Contents Order Qty
N/O Inlet solenoid valves (x2)
N/C Exhaust solenoid valves (x2)
Outlet check valves (x2)
Associated seals and fixings
Contents Order Qty
Inlet cylinder valves (x2)
N/C Exhaust solenoid valves (x2)
N/C Exhaust solenoid valves (x2)
Outlet check valves (x2)
24V Control solenoid valve
Associated seals and fixings
Contents Order Qty
11 Litre Container of AA
BA-DME060-E
x4
Contents Order Qty
Moulded gaskets
Support screens
Column pads
Fixing screws
Contents Order Qty
Column o-rings
Contents Order Qty
1
1
See
Table
BA-DME080-E
x5
1
1
1
1