Preparing For Use; What's In The Box; Filling The Bar And Chain Oil Reservoir; Important - Oregon PS750-092 Manual Original De Instrucciones

Preparing for Use

DANGER: To avoid serious personal
injury, do not operate the pole saw
without the guide bar, saw chain, and side
cover properly assembled.
WARNING: Do not attempt to operate
the pole saw if any part is damaged or
missing.
WARNING: An electric power tool
that is plugged in can start accidentally.
Unplug the pole saw before preparing for
use or performing maintenance.

What's in the box?

The pole saw requires some assembly before
use. These items ship with the pole saw:
• Pole Saw
• Blade cover
• Harness
After removing the pole saw from the box,
inspect it carefully to ensure no damage has
occurred during shipping and that no parts are
missing. If any parts are damaged or missing,
do not use the pole saw. Contact Oregon
obtain replacement parts. For country-specific
telephone numbers, see "Customer Service by
Country".
Pole Saw Model PS750-092
Preparing for Use
Filling the Bar and
Chain Oil Reservoir
IMPORTANT: Bar and chain oil prevents
premature wear. Never operate the pole
saw if oil is not visible. Check oil level
frequently and fill as needed.
Bar and chain oil is required to properly
lubricate the guide bar and saw chain. The
pole saw is equipped with an automatic oiler
that deposits oil on the bar and chain when
running, keeping them properly lubricated. Use
Oregon® bar and chain oil for best results. It is
specially designed to provide low friction and
faster cuts. NEVER use oil or other lubricants
not specifically designed for use on the bar and
chain. This can lead to a clogged oil system,
which may cause premature wear of the bar
and chain.
• Place the pole saw on its side on a firm, flat
surface, so that the oil cap ( ) is on top (Fig. ).
FIG. 4
to
®
• Clean any debris from the cap area.
• Remove the cap.
• Carefully pour the bar and chain oil into the
reservoir.
• Replace the cap and make sure oil is visible in
the reservoir ( ).
If oil is not visible in the reservoir, additional bar
and chain oil is necessary.
(1)
(2)
13