Important Information; Proper Use; Safety Information - Auerswald COMfortel WS-500S Manual De Instrucciones

Important Information.................................................... 21
Proper Use .............................................................. 21
Safety Information ................................................... 21
Software License Agreement .................................. 23
Technical Data ........................................................ 24
Environmental Notices ............................................ 25
Declaration of Conformity........................................ 25
Conditions of Warranty............................................ 25
Single-Cell and Multi-Cell Systems - Introduction........ 26
Single-Cell System with COMfortel WS-500S......... 26
Multi-Cell System with COMfortel WS-500M........... 26
Initial Commissioning.................................................... 28

Important Information

Proper Use

The COMfortel WS-500S is a DECT base station for single-cell operation. Using
activation, you can convert the device into a COMfortel WS-500M.
The COMfortel WS-500M is a DECT base station for setting up a multi-cell
system.
Both devices connect one or more DECT telephones to a VoIP PBX. The
following Auerswald/FONtevo PBXs are supported, including provisioning:
• COMpact 4000 (from firmware 7.4B)
• COMpact 5000/R (from firmware 7.4B)
• COMpact 5200/5200R/5500R (from firmware 7.4B)
• COMmander 6000/R/RX (from firmware 7.4B)
Operation as a normal DECT system is possible on these PBXs:
• COMpact 5010/5020 VoIP
• COMmander Basic.2, Basic.2 19"
• COMmander Business, Business 19"
• SIP-based ICT systems from other manufacturers (check their compatibility
in advance)

Safety Information

To ensure that you are able to use the device safely and without faults, comply
with the notes below. Incorrect or improper use may, for example, cause
COMfortel WS-500S/500M - Instructions V02 08/2019
English
Overview and Processing Sequence.......................28
Planning Your DECT Network.................................29
Wall Mounting..........................................................29
Configuring the PBX for Provisioning ......................30
Connecting to the LAN ............................................31
Setting the Device Role and Resetting the Device
(only COMfortel WS-500M) .....................................32
Logging in to the Web Configurator.........................33
Configuring a Base Station......................................33
Appendix.......................................................................35
LEDs (Light-Emitting Diodes) ..................................35
Performing a Firmware Update ...............................37
Resetting the Device (only COMfortel WS-500S)....37
Important Information
21