Appendix; Leds (Light-Emitting Diodes) - Auerswald COMfortel WS-500S Manual De Instrucciones

– Start by selecting Settings > Mobile devices > Administration in the
Web configurator on the COMfortel WS-500S/WS-500M. On the page that
is then displayed, click the Register now button.
– Confirmation on the mobile device
Note: Both must be performed within 3 minutes.
Note: You will find more information in the help for the COMfortel WS-
500S/500M Web Configurator.
Enabling Additional Base Stations (only COMfortel WS-500M)
• Each additional connected base station, found by the Integrator/DECT
Manager, must be activated in the Integrator/DECT Manager.
– Perform configuration on the Settings > Base stations > Administration
page in the Web configurator on the COMfortel WS-500M

Appendix

LEDs (Light-Emitting Diodes)

The LEDs on the front face indicate different operating states according to what
the device is currently doing. The LEDs can shine in three different colours (red,
blue or green), or are off (here: empty table row).
COMfortel WS-500S
LED 1 (left)
0.5 s 0.5 s 0.5 s 0.5 s 0.5 s 0.5 s 0.5 s 0.5 s
Red
Blue
Red
Blue
Blue
Blue
COMfortel WS-500S/500M - Instructions V02 08/2019
LED 2 (right)
Red
Blue
Red
Green
Green
Green
Description
Switched off
The device is booting
Firmware update is
running
No LAN connection or no
IP address available/
assigned
DECT ready
DECT data traffic
DECT overload
Appendix
35