Performing A Firmware Update; Resetting The Device (Only Comfortel Ws-500S) - Auerswald COMfortel WS-500S Manual De Instrucciones

LED 1 (left)
0.5 s 0.5 s 0.5 s 0.5 s 0.5 s 0.5 s 0.5 s 0.5 s
COMfortel WS-500M with Device Role "DECT Manager and Integrator"
(Base Station Switched On)
Blue
Blue
Blue
Blue
Blue
Blue

Performing a Firmware Update

Note for COMfortel WS-500M: Devices with the device role "Only base
station" automatically receive the latest firmware from the assigned DECT
Manager.
1. Log in to the base station Web Configurator as "admin".
2. Select Settings > System > Firmware to display the Firmware page.
3. In URL to firmware file, enter the URL of the server on which the firmware
is located, or click on Browse... and then select the firmware file in the
computer's file system.
Note: The firmware update might take a long time. During the update, do
not disconnect the device from the local network.

Resetting the Device (only COMfortel WS-500S)

Note for COMfortel WS-500M: To reset the device, follow the steps on
page page 32.
COMfortel WS-500S/500M - Instructions V02 08/2019
LED 2 (right)
Green
Green
Green
Green
Dependent on data
traffic state
Description
Not synchronised, DECT
ready
Synchronised, DECT
ready
Synchronised, system
data traffic, no DECT data
traffic
Synchronised, DECT data
traffic
Synchronised, DECT
overload
Connection to the
Integrator lost
Appendix
37