Cleaning And Care - Unold 78605 Instrucciones De Uso

Ocultar thumbs Ver también para 78605:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 75
12. Only operate the mixer when the
lid is on. When the appliance is in
operation, press the lid onto the
container with your hand.
13. Pour ingredients onto the running
blade through the opening in the
lid. Please be careful when add-
ing ingredients: When the appli-
ance is running liquid can spray
out of the opening.
14. Be particularly careful when pro-
cessing hot ingredients.
15. When processing warm ingredi-
ents, always hold the lid firmly
on the appliance with your hand,
otherwise the lid can loosen and
the food you are mixing can spray
out. Steam or splashes can cause
scalding or burn injuries. You can
add hot foods, you cannot add
boiling foods.

CLEANING AND CARE

1.
The container and the blade can
be easily cleaned with the aid
of the momentary switch. Put
a little warm water and a few
drops of washing-up liquid in the
container and briefly press the
momentary button. Rinse out with
clean water.
Before cleaning, always turn
off the appliance and unplug it
from the electrical outlet.
CAUTION! Be careful when
cleaning the cross-blade, the
Copyright UNOLD AG | www.unold.de
16. When chopping solid ingredients,
we recommend that you activate
the momentary switch several
times, because in continuous
operation the blade can seize due
to the ingredients.
17. Only take the mixing container off
of the base when the motor has
come to a complete standstill.
18. After use, turn the rotary knob to
„0" and unplug the mains plug
from the electrical outlet.
19. To unlock, take off the mixing
container by lifting it straight off
of the base. Do not mix foods that
contain a lot of oil, such as poppy
seeds or nuts (for poppy butter or
nut butter) for longer than 90 sec-
onds because the motor can over-
heat.
cutting edges are very sharp. Do not
immerse the appliance in water.
2.
To avoid damaging the surfaces
do not use aggressive cleaning
agents or cleaning sponges.
3.
Do not immerse the base in water.
Wipe off the base with a damp
cloth and dry it with a soft cloth.
Ensure that water cannot get into
the base.
4.
Empty
the
before cleaning.
mixer
completely
29

Publicidad

Tabla de contenido
loading

Tabla de contenido