Prior to the installation
Please read the pre-installation data sheets. These are avail-
able to download on the Internet at www.pro.duravit.com.
Mounting instructions
NOTE
A pipe interrupter is absolutely essential for baths with a
base inlet.
> Comply with assembly scheme.
4
Avoiding damage
NOTE
Suction lifters can cause damage to the surface of
lacquered bathtubs.
> Attach suction lifters to the inside of lacquered
bathtubs.
5
Tipping the whirltub
> When tipping the whirltub ensure that the edge is
not damaged.
> Insert cardboard and protective film underneath to
protect the whirltub.
16
Checking the whirl system
> Switch on the whirl system for 10 minutes:
run this through once completely in the case of
circuits with different levels of intensity.
> Leave the water in the bathtub and wait
10 minutes.
> Check to make sure that it is leak-tight.
> If adjustments are required, repeat the check.
8
57081_WH_M_Acrylic_FST/19.05.3