Important Information; Mounting Instructions - DURAVIT OpenSpace Instrucciones De Montaje

Important information

Mounting instructions information
These mounting instructions come as part of the Duravit
shower screen and should be read carefully prior to
installation.
Explanation of the key words and symbols
Is used to address practices not
NotIcE
related to physical injury.
Link to the mounting information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
target readership and qualifications
The shower screen may only be installed by a qualified
plumber.
Risk of product and/or property
NotIcE
damage!
> Observe the local installation regulations and any
country­specific standards at all times.
MAL_68131.indb 5

Mounting instructions

Please read pre­installation information sheets prior to
the installation. These are available to download on the
Internet at www.duravit.com.
Installing a shower screen with a tap on the
1
right (Diagram 1)
> The illustrated installation steps should be
reversed when installing a shower screen
with a tap on the right.
observe the tolerance compensation
3
(Diagram 3)
> For a trouble­free installation, position the
template onto the neutral point on the wall
with some clearance, if necessary.
> Washers are included to adjust the height
of the wall profiles in order to raise them as
required.
+
6 9
Fixing the profiles in place (Diagrams 6+9)
> Adjust the fixing to the structural conditions.
II
observing the mounting area (Diagram II)
> Observe the mounting area of the tap
unit in accordance with the dimensional
drawing, see grey areas.
5
DA_M_OpenSpace/15.12.7
03.12.2015 15:21:00