Installation Mode - Philips 26PFL5302D Guia Del Usuario

TV menu I Installation
ChanneJs Insga]Jation update
Channel tuning
Available channels:
- Cable (analog NTSC or digital QAM): max. from 1 to 125
- Antenna (analog NTSC or digital ATSC): max. from 2 to 69
If a tuned channel is noc yec in the master channel map, the TV will attempt
to tune the channel and it will be added to the map.
If the channel is noc acquired, a message will appear chat the channel is not
available.
When you tune an audio-only digital subchannel, a display appears with the
message Audio only.
Note: Subchannel selections
- The new standards employed with digital broadcasting make it possible to receive
multiple program channels under a single major channel number which can be
selected by pressing the digit remote control direcbacces channel number entry.
- The number of channels shown at installation includes paid channels but you
may not be able to see all of them unless you sign up with cable TV operators.
Important:
A_er the installation of the TV channels has been done, always make a selection
in the Installation menu between Antenna or Cable whether you want to watch
Antenna TV channels or Cable TV channels.
If you make use of a signal splitter do not forget to put the switch in the
corresponding position.
Installation update
(only with Digital TV broadcasting)
This allows you to automatically tune to and update all available digital channels.
Notes: this will not reinstall uninsta/led channels;
- digital channels that are not encountered any longer will be removed;
- new channels found will not be adcled to any favonte list;
- already installed channels will not be renumbered.
Weal( channel installation
This enables you to do a weak ATSC digital channel installation, This is only
available for TV channels installed via an antenna connection,
O If a certain channel you expect to see is not tuned or is weak, you can install
it manually. Call your local broadcasting station to know what channel its
being transmitted on.
Select that channel in the displayed list of TV channels (in the antenna mode).
The signal strength is displayed and updated continuously as you rotate the
antenna.
Installation mode
This allows you to select the already stored terrestrial or cable TV channels,
Choose for Antenna or Cable whether these signals are present,
Uninstali channels
This allows you to uninstall a stored channel so that it is no longer possible to
tune to, This also allows you to reinstall an earlier uninstaJJed channel,
O Select the channel you want to uninstalL
Press the green color button to uninstaJ[ the selected channel,
The uninstalled channel is indicated in the list by an icon in front of the
uninstaJJed channel,
Press the green color button again to reinstall the uninstaJled channel
Note : Uninstalled channels are not reinstalled dunng an installation update.
18