Philips 26PFL5302D Guia Del Usuario página 35

Automatic software upgrade procedure
For an automatic software upgrade copy the "autorun.upg" file in the root
directory of the USB portable memory.
O Power off your TV and remove all memory devices.
O Insert the USB portable memory that contains the downloaded software
upgrade.
O Switch on your TV with the power switch (_ at the right side of the TV.
O At startup the TV will scan the USB portable memory until it finds the
update content. The TV will automatically go to the upgrade mode. After a
few seconds it will display the status of the upgrade procedure.
O
Warning:
• You are not allowed to remove the USB portable memory dunng the SOl'Ware
upgrade procedure!
• In case of a power drop during the up;crude precedure, don't remove the USB
portable memory frem the TK The TV will continue the upgrade as soon as the
power comes back,
• If you try to upgrade to a software_version lower than the current version, a
confirmation will be asked. Downgrading to older SOl'ware should only be done in
case of real necessity.
• If an error occurs during the upgm@ you should retry the procedure or contact
your dealen
When the software upgrade was successful, remove the USB portable
memory and restart your TV with the power switch (_ at the right side of
the TV.
Your TV will start up with the new software.
Note: Once the upgrade is finished use your PC to remove the TV sof_zare from
your USB portable memory.
Manual software upgrade procedure
For a manual software upgrade copy the "autorun.upg" file in a directory
called "Upgrades" located in the root of the USB portable memory.
O Insert the portable memory that contains the downloaded software
upgrade.
O The TV will automatically start the content browser menu. Exit the menu by
pressing the MENU key.
0 Select Software Upgrade in the Installation menu. Go to Local upgrades.
The TV will list all compatible images available on the USB portable memory
and display the data for each selected upgrade image.
Q Select the correct upgrade image and press the red color button to start
the upgrade.
Your TV will restart and will automatically go to the upgrade mode. After a
few seconds it will display the status of the upgrade procedure.
Warning:
If you try to upgrade to a so.are version equal or lower than the current version,
a confirmation will be asked. Downgrading to older software should only be done in
case of real necessity.
0
When the software upgrade was successful, remove the USB portable
memory and restart your TV with the power switch (_ at the right side of
the TV.
Your TV will start up with the new software.
32