Video Camera/Games; Digital; Console To Tv; Usb/Headphone - Philips 26PFL5302D Guia Del Usuario

Ocultar thumbs Ver también para 26PFL5302D:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Video
Camera/Games
Console
to TV
Next
SOUl'Ce
TV Side Jack Panel
Remote
Control
Source Button
(_ Side
connections
- USB/Headphone
(ii_Digital
Surround
receiver
u3
Back of TV
AUDIO
OUT
(DIGITAL)
Using
Composite
Audio/Video
Input
O
Connect
the video cable (yellow) from the camera (or other devices) to
the video input of the TV Side Jack panel.
OR
Connect
the S-video cable from the camera (or other devices) to the TV
Side Jack panel.
O
Connect
the red and white
audio cables from the device into the audio
AV inputs of the TV.
Tip: For mona devices, connect only the white audio cable from the device's
audio output to the white audio input of the TK
O
Turn the TV and device on. Press the Source
button
on the remote
control
unui the connected
source Side appears on the TV screen.
Press PLAY on the device to verify the connection.
Note: Interfbmnce will occur when S-vJdeoand Corr,posite audio/video am
connected at the same time.
Headphone
O
Insert the plug into the headphone
socket
_
as shown.
Press the MUTE button
on the remote
control
to switch off the internal
loudspeakers
of the TV.
The headphone impedance must be between 8 to 4000 Ohm. The headphone
socket is a 3.5 mm jack
In the Sound
menu,
select
Headphone
volume
to adjust the headphone
volume.
Viewing
content
from
a USB
device
Inserting
a USB
device
Note: USB devices are not supplied with this TK
Insert a USB device in the USB connector
at the side of the TV.
When a USB device is inserted,
the Multimedia
browser
menu will be
displayed automatically.
Removing
the USB
device
O
First by switching
off the menu.
To do so, navigate
to the Multimedia
browser
menu
and press the
MENU
button
to exit the menu.
Remove
the USB device.
Connect
a Digital
MuluChannel
Surround
receiver
to the AUDIO
OUT
(DIGITAL)
connector
at the bottom
of the TV.
The TV can output
Digital audio via the AUDIO
OUT
(DIGITAL)
connector
to an external
amplifier
or receiver.
If your amplifier
or receiver
has a matching
connector
for Digital Audio
In,
you can connect
it with a single cable to the TV's AUDIO
OUT
(DIGITAL).
23

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido