Menu Option Adjustment - Premier TV-5642LED Manual De Instrucciones

LED COLOR TV
When selecting the signal source, the screen will display the information.
When there is no signal from the selected source, the warning m essage will be
Displayed as per illustration. Either change the channel i n TV mode or press
Source button to change

2.3 Menu Option Adjustment

After you have installed the batteries into the remote control, you will
need to set some preferences on the LED TV, using the menu system.
- The buttons for menu option adjustment include:M enu,
- Press the Menu button to open the OSD Menu, then press
the pages. the pages are displayed in the following sequence (circular display):
CHANNEL
" "
Note: CHANNEL is only for TV .
Press the Menu button to display the menu system.
1
,
Press button to select the menu pages.
2
,
3
Press button to select an item.
, button to select or adjust a setting.
4
Press
5
If you do not make a selection within 10 seconds, the menu will close A utomatically.
6 Press the Menu button to return or exit OSD menu.
TV AV
MEDIA2 MEDIA1
TV mode
6
NTSC M
source.
NO SIGNAL
PICTURE
YPbPr HDMI1
PC HDMI2
,
SOUND TIME
6
, ,
Enter buttons.
, button to select
OPTION