dirna Bergstrom bycool SLIM FIT Instrucciones De Montaje página 18

SLIM FIT
EN
6
Screw (2) M6 L=50 hexagons on the rear of the
unit (direction of travel) with rubber washer and flat
washer, and tighten with a torque of 4.75±10% Nm.
7
Screw (2) M6 L=98 hexagons on the rear of the
unit (direction of travel) with rubber washer and flat
washer, and tighten with a torque of 4.75±10% Nm.
8
Position the console and move the unit using the
curtain rail as a reference (the console must come
up against the rail). The grooves in the base must
be checked to ensure they are not visible and are
supported on the EPDM joint.
8
6
7
8
18
®