GRE Astralpool CPH14 Manual De Instalación página 7

Alarm
OFA First Alarm (time >70%)
OFA Second Alarm (time =100%)
Flow Rate
System Error
Calibration Funciont
Default parameters:
Language = UK
•
Set Point value= 7,4 pH; 750mV (Rx)
•
Dosing Method = Acid; Low (Rx)
•
Time OFA = OFF
•
Calibration = 7/4 (2 point); 465mV (Rx)
•
Flow Input= OFF
•
Code 0000137847
Display
OFA Alarm
OFA STOP
Flow
Parameter Error
Error 7 ph Error 4 ph
Error 465 mV
To restore Default parameters run Following steps:
Rev 1.0
- Push Enter Key to reset
- Push Enter Key to reset
- Restore Flow Rate
- Press Enter Key to replace Default parameter
- Destroy Unit
- Restore Probe or Buffer
solution and repeat calibration function
Power off Pool Basic unit
•
Keep pressing both buttons simultaneously
•
and To turn on the system Basic.
The system will show Default No
•
Press for Default Yes
•
Press to restore Default parameters.
•
Actions to do
6