Boil-Dry Protection; Cleaning And Care - Bodum BISTRO 11870 Instrucciones De Uso

Ocultar thumbs Ver también para BISTRO 11870:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
BOIL-DRY
1. If there isn't sufficient milk in the milk
PROTECTION
frother, it will shut OFF automatically.
Nevertheless, always ensure that there is
enough milk in the product, as switching the
device OFF automatically can shorten its life
span.
2. Allow the product to cool down before
filling it again.
CLEANING
NOTE: To reduce build-up of milk residue,
AND CARE
always empty any residual milk and clean
immediately after frothing is completed.Never
leave liquid in the milk frother overnight.
1. Unplug the power base from the electrical
outlet and let the milk frother cool down
completely before cleaning.
2. Clean the inside of the jug with a damp &
soft cloth, or sponge. Only the whisk can be
detached to rinse with water.
3. If necessary, put on the whisk attachment to
the whisk head. Fill clean water to MAX. level,
then add a couple drops of mild liquid soap.
Turn the milk frother ON and allow the soapy
water to clean the jug. After the milk frother
turns itself OFF, discard the soap water. Pour
fresh clean water into the jug and discard;
repeat until soap residue is completely
removed. Wipe out with damp cloth.
WARNING! Do not immerse the milk frother
or the power base in water or any other
liquid. Never place the milk frother under
11
running water to clean. Do not place in the
dishwasher.
4. Make sure that all electrical connectors and
sockets are kept dry.
5. Rinse lid and whisk in clean water and dry
thoroughly.
6. Never use any solvents or abrasive cleaning
agents, hard brushes, metal or sharp objects
to clean. Solvents are hazardous to health
and harm the product's plastic parts; abrasive
cleaning agents and cleaning accessories may
scratch the product's surfaces.
STORAGE
1. Unplug milk frother and allow it to cool.
2. Store in its box or in a cool and dry place.
3. Never store the appliance while it is still
connected to mains power.
4. Never wrap cord tightly around the
appliance.
5. Do not put any stress on the cord where it
enters the appliance as it may cause the cord
to fray and break.
12
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido