Personal Safety - Greencut TDC600C Manual De Instrucciones

All information in this manual is relevant to your own safety and that of your environment. If you have any questions
about the information contained in this manual, consult a professional or contact the Official Technical Service.
The following information on hazards and precautions includes the most likely situations that may arise during use of
this machine. Consult all product documentation, packaging and labels before use.
If you encounter a situation not described in this manual, use common sense to use the machine as safely as possible
and if you see danger, do not use the machine.
USERS
• This product has been designed to be handled by users of legal age who have read and understood these
instructions. Do not allow underage persons or persons who do not understand these instructions to use the
product.
• Before using this product, familiarize yourself with it. Make sure you know where all the controls are, the safety
devices and how they should be used.
• If you are an inexperienced user we recommend that you practice doing simple work and, if possible, in the
company of an experienced person.

PERSONAL SAFETY

• Don't force this machine. Use this machine, accessories, tools, etc. according to these instructions, taking into
account the conditions and the work to be carried out. Using this machine for unintended purposes can cause
a dangerous situation.
• Wear tight, sturdy gloves when handling sharp blades and saw blades. Do not wear gloves when operating the drill.
• Use clamps or jaws to secure the workpiece to the bench.
• Be alert, watch what you're doing when you drive this machine.
• Avoid unintentional start-up of the unit. Make sure the switches are in the off position before connecting the
machine to an electrical power source.
• Do not use this machine when tired or under the influence of drugs, alcohol, or medications.
• Check that all security features are installed and in good condition. Do not use this machine if any of its
components are damaged.
• Operate the machine only when it is on a fixed, stable, level surface. Slippery or unstable surfaces may cause a
loss of balance or control of the machine.
• Do not exceed the range of drill bits from 1.5 to 13mm in diameter.
• Inhalation of sawdust may present health risks. The use of a mask and a dust extraction system is recommended.
• The workpieces must be able to be securely fastened to a clamp or to the machine table. Workpieces thrown by
the machine can cause serious injury and/or property damage.
• Do not operate the machine in rain or extreme humidity.
• Do not leave this machine running unattended.
WORK CLOTHES
• Dress appropriately. Do not wear loose clothing or jewelry that could get caught in moving parts. We recommend
the use of:
-
Safety glasses.
-
Hearing protection.
-
Resistant and non-slip gloves.
-
Dust mask.
49
EN