Installation; Base Installation; Door Handle Installation; Door Position Adjustment - Presenza QL038 Manual Operativo

Installation

BASE INSTALLATION

- Unpack the unit and place the sink (B) on a blanket or
cardboard to protect the surface .
- Turn the cabinet (A) upside down onto the protective
surface .
- Gently attach the cabinet base (G) onto its proper location.
Using the supplied base screws (I), attach the base to the
cabinet .
- Attach cabinet feet (J) to the base.
- Gently place the cabinet upright .

DOOR HANDLE INSTALLATION

- Insert the door handle screws (H) into the pre-drilled holes
on the door .
- Attach the door handle (F) and hand tighten the door handle
screws (H).
F
H
QL038
CAUTION:
Do not place side load onto feet when rotating
the cabinet .
G
I
A

DOOR POSITION ADJUSTMENT

If the doors need to be repositioned, the hinges can be adjusted to
ensure a precise fit with the cabinet.
1 . The lateral adjustment
screw adjusts the door
left or right .
2 . The horizontal
adjustment screw
adjusts the door forward
or backward .
3 . The vertical adjustment
screw adjusts the door
up or down .
6
1
2
3