Manual Operation - Allmand Night-Lite E-Serie Manual Del Operador

Operating The Tower Lights
WARNING
Looking at illuminated light fixtures
could result in serious injury. Never
look directly at illuminated light fixtures.
Turning The Lights On
1. Unlatch and open the control panel
door.
2. Turn the main circuit breaker (A,
Figure 13) to the ON position.
3. Select the preferred mode of opera-
tion: Timer / Manual or Photocell.
See Light Operation Mode.
4. Turn the Tower / Light switch (B,
Figure 13) to the LIGHT position.
5. Turn the individual light switches
(C, Figure 13) (1 - 4) to ON (if set to
OFF).
NOTE: If the mode of operation is set
to Photocell or Timer, the lights will
not come on until dark (photocell) or
until the time selected (timer).
Turning The Lights Off
• If in Manual Mode, turn manual mode
off. See Light Operation Mode.
• If in Photocell or Timer mode, the
lights will turn off automatically in
ambient light (photocell) or at the time
selected (timer).
C
Figure 13
16
B
Light Operation Mode
The tower lights can be controlled man-
ually, by photocell, or by timer.

Manual Operation

1. Turn the Photocell / Timer switch (B,
Figure 13) to the TIMER position.
2. Press the OVR button (G, Figure
14) on the timer module to turn on
Manual mode. Press again to turn off.
Photocell Operation
Turn the Photocell / Timer switch (B,
Figure 13) to the PHOTOCELL position.
The lights will automatically come on in
the absence of ambient light.
NOTE: For most consistent operation,
avoid locating the unit in a shadowed
area, and orient the unit so the control
box faces north.
Timer Operation
Turn the Photocell / Timer switch (B,
Figure 13) to the TIMER position.
To set the timer:
1. Reset the timer module (first time
use):
a. With a blunt object press and
release the Reset button (I, Figure
14). The timer screen (C) will flash.
b. Press the Clock (A, Figure 14) and
Hour (E) buttons simultaneously.
The time will reset to 12:00am.
2. Set the clock:
a. If currently in Daylight Savings
Time, press the +1h button (H,
Figure 14). (If not, bypass this step.)
b. Press and hold the Clock button
(A, Figure 14) while simultaneously
pressing the Day (D), Hour (E) and/
A
or Minute (F) buttons until the cor-
rect day and time appears.
3. Set the Timer
a. Timer On:
• Press the Timer button (B, Figure
14) once. ON will appear to the
left of the display.
www.allmand.com