Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
C. Systolic blood pressure
D. Year/month/day, time
E. Blood Pressure Rating
INSTRUCTIONS FOR USE
Place 4 AAA-size batteries in the device. Remove the battery com-
partment cover. Ensure that they are placed in accordance with the
polarity indicated in the appliance. Close the battery compartment.
Prior to taking any reading, check that the low battery indicator is
not displayed. Also check that there is no damage prior to each use.
First time using the device. User, date and time programming.
Once you insert the battery, the Blood Pressure Monitor will enter
Clock and Date Adjustment Mode.
If the time of the device is already set and need to be changed,
adjustment can be reached by pressing both the "START/STOP"
and "MEM" button for 2 seconds in Standby Mode.
In Clock and Date Adjustment Mode , the time format will blink
at first Press the button "MEM" can change time format.Press the
button "START" repeatedly, the year, month, day, hour and minute
will blink in turn. While the number is blinking, press the button
"MEM" to increase the number. Keep on pressing the button
"MEM", the number will increase rapidly.
You can turn off the monitor by pressing the "START" button when
the minutes flash, then confirm the time and date.
The monitor will switch off automatically following 1 minute of non-
operation with the time and date remaining unchanged.
Once the batteries are changed, the time and date must be reset.
Voice settings
Language settings:
Press and keep the "MEM" button pressed while the device is
turned off until the device turns on and begins to show all of the
different languages using the symbols: L1 -Spanish L2 - English,
-L3 Portuguese and L0 to disable the voice function.
Once you have selected the desired language, press the "MEM"
button again to save the language.
20
Volume settings:
Publicidad
Tabla de contenido
