Daga PM-150V Instrucciones De Uso página 24

Repeat the reading if you do not trust the validity of the reading
values. In the event that you believe that the results are not correct,
take the appliance to a Technical Support Service.
PROBLEM
• The batteries have
When pressing
the on/off • The polarity with which
button, nothing
appears on the
screen. • The batteries are not
The pressure
• Have you remained
exerted by
the cuff is not
constant
• Is the cuff is the same
The reading is • Is the cuff placed
extremely high
or low • Have you remained
• Have you remained
The pulse
reading is too
high or too • Have you taken the re-
low.
The batteries
• The batteries are faulty
expire quickly
expired.
the batteries were pla-
ced is not correct.
making proper contact.
stationary during this
process?
height of the heart?
properly?
stationary during this
process?
stationary during this
process?
ading just after doing
physical exercise?
SOLUTION
• Change the batte-
ries with new ones
• Insert the batteries
properly.
• Wipe the cavity
where the batteries
sit with a dry cloth.
• Stay still and silent
during the reading.
• Make sure your
posture is correct
during the reading.
• Position the cuff
properly (Fig. 1)
• Stay still and silent
during the reading.
• Keep still and silent
during the reading.
• Take the reading
again after 5 minu-
tes of rest.
• Use alkaline bat-
teries from well-
known manufac-
turers
24