babymoov A047009 Instrucciones De Uso página 8

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
Thank you for choosing the Babymoov digital humidifier
• Nominal voltage (alternating current): 120 V / 60 Hz
• Power: 25 W
• Vaporisation output: 8.5 fl oz./hour (250 ml/hour) at maximum level
• Water reservoir capacity: 0.65 gallon (2.5 L)
• Suitable for a room of 86 sq. ft. to 215 sq. ft. (8 to 20 m²)
• Maximum independent use: 10 hours
• Adjustment range of the humidity sensor: 30 to 90 %
• The recommended humidity level is a child's room is from 40 to 50%
1. Luminescent LED
2. Air outlet
3. Water level sensor
4. Transducer
5. Valve column
6. Steam outlet
7. Cover
8. Water tank
9. Evacuation channel
10. Main housing
11. Electrical plug
A/ First use
Do not operate the humidifier when the water tank is empty!
1. Lift the cover.
2. Remove the tank from the base of the digital humidifier. Turn the water tank upside-down.
3. Unscrew the filler cap.
Make sure that no foreign objects are in the water tank.
4. Fill the water tank with tap water or distilled water.
5. Screw the filler cap tightly.
6. Replace the tank on the main casing. Put the cover back in its place. Wait a few seconds for the digital humidifier
base to fill with water.
Do not pour water into the mist outlet of the appliance.
7. Plug the cable into the mains. Press the button
8. Point the mist jet in the desired direction. Please ensure that the mist outlet is not directed at walls, sockets, or furniture.
9. It is advisable to empty your digital humidifier very regularly, to prevent the development of bacteria in the tank. Turn
off the digital humidifier by pressing the button
10. Empty out the water from the tank and the base, following the direction of the arrows on the main casing. Finally,
wipe away any remaining drops with a soft cloth.
11. Essential oil diffuser.
Warning: keep essential oils away from children. Essential oils are dangerous if swallowed.
Pour a few drops of essential oil into the small holder. Do not overfill holder. Place holder on the top of the steam
outlet tube. When the holder is empty, clean it with a little soap and water.
Warning: never pour essential oil into the water tank.
B/ Initial configuration (without setting)
- The clock shows: 12.00.
- The hygrometer shows the level of humidity in the room: (XX) % of humidity.
- The thermometer shows the temperature of the room: (XX) °F.
- The default setting of the desired humidity level is 90 %.
- The icon
and the water level indicator depend on the amount of water in the tank:
• if there is enough water: the icon
• if there is not enough water: the icon
- The default setting of the steam output shown on the LCD screen will be the minimum outflow level (the shortest bar).
8
TECHNICAL CHARACTERISTICS
HOW TO USE
12. On/off switch
13. Setting the humidity level
(hygrometry)
14. Timer icon
15. Time display
16. Humidity sensor
17. Water level icon
18. Humidifier function icon
19. Locking icon
20. Setting the clock and
programming the timer
to turn on the digital humidifier.
. Unplug the appliance, remove the water tank from its base.
will not show on the LCD screen and the indicator will not flash.
will appear on the LCD screen and the indicator will flash.
DIGITAL HUMIDIFIER • Instruction Manual
21. Blue/red nightlight
22. Humidity level display (hygrometry)
23. Setting the steam outlet and
+ / - control
24. Temperature display (thermometer)
25. Water level indicator
26. Steam output level display
27. Essential oil diffuser

Publicidad

Tabla de contenido
loading

Tabla de contenido