babymoov A047009 Instrucciones De Uso página 9

C/ Setting the functions
Setting the steam output
Press the "+" or "-" button to set the steam output.
Five bars represent the various levels of steam output. The power of each bar will be as follows.
- 1st bar level: steam output = 3.7 fl oz./hour (110 ml/hour)
- 2nd bar level: steam output = 5 fl oz./hour (150 ml/hour)
- 3rd bar level: steam output = 6 fl oz./hour (180 ml/hour)
- 4th bar level: steam output = 7.3 fl oz./hour (220 ml/hour)
- 5th bar level: steam output = 8.3 fl oz. (250 ml/hour)
Once the humidifier has been unplugged or turned off, the steam output will automatically return to the last setting.
Setting the digital clock
- Press the button and maintain the pressure for 3 seconds, the programme will enter the clock setting mode.
- The two time figures in the clock display area will flash and show the figures "12".
- Start setting the hour by pressing the "+" or "-" button. The setting range is from 1 to 12 hours and each push on the
button represents one hour. If it is one in the morning, the screen will display "1
when you press the "+" or "-" button and keep it pressed down, the hours - from 1 to 12 hours – will automatically
increase or decrease).
- If the number reaches "11", when you press the "+" button, it becomes "12" and "AM" in the display area would be
switched to "PM".
- When you have finished setting the hour, press the button
to set the minutes.
Note:
if you have not pressed the button
will not be implemented or recognized. The clock on the screen will return to its initial setting and will indicate "12:00".
- In the minute setting mode, the two minute figures in the clock display area will flash and show the figures "00".
- Start setting the minutes by pressing the "+" or "-" button. The setting range is from 0 to 59 minutes and every push
of the button represents one minute (note: when you press the "+" or "-" button and maintain the pressure, the
minutes - from 1 to 59 – will automatically increase or decrease). If the screen displays "59", when you press "+", the
screen will display "00". If the screen shows "00", when you press "-", the screen will display "59".
- Once the minute setting is complete, press the button
Note:
if you haven't pressed the button
has not been completed, the minute display returns to "00".
Room temperature display
The digital humidifier will detect the room temperature and will display it on the LCD screen.
Hygrometer display
The humidity sensor detects humidity in the room and displays the humidity level (% humidity) on the hygrometer
display (detection range: 30 to 90 % humidity).
Setting the desired humidity level (hygrometry)
- Press the button twice, the programme will enter the desired humidity level setting. The figures "90" will flash and
will be displayed in the clock area of the LCD screen
- The initial humidity level setting is 90 %. Presss the "+" or "-" button to set the desired humidity level. The setting unit
is 5 % each time you press. The humidity level setting range is from 30 % to 90 %.
- The recommended humidity level is a child's room is from 40 to 50 %.
- When the setting is complete, press the button
complete, the icon
will continue to flash for 45 seconds, and will return to the initial setting). You can check the desired humidity level by
pressing the button
screen display will reappear.
- The humidity sensor will detect the humidity level in the room. The programme will automatically detect variations in
the humidity level and will set the desired level.
- Cancelling the humidity level setting: press the button
cancel the humidity level setting, the humidification function is no longer active).
to confirm, the adjusted clock will continue to flash for 45 seconds. The hour setting
to confirm, the adjusted clock will continue to flash for 45 seconds. If the setting
lights up on the LCD screen (note: if you have not pressed the button
once. The desired setting will then appear on the screen for 3 seconds, after which the previous
DIGITAL HUMIDIFIER • Instruction Manual
once to confirm that the setting is complete and go on
once to confirm that the minute programming setting is complete.
once to confirm the setting. When the setting of the programme is
for 5 seconds, the setting will be cancelled (note: if you
AM :00" instead of "01 AM
to confirm, the setting
:00" (note:
9