Additional Information; Error Messages - Pioneer MVH-S115UI Manual De Instrucciones

C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
PioneerTest.book Page 17 Tuesday, March 6, 2018 2:09 PM

Additional Information

Troubleshooting
The display automatically returns to
the normal display.
 No operations have been made for
about 30 seconds.
– Perform an operation.
The repeat play range changes
unexpectedly.
 Depending on the repeat play
range, the selected range may
change when another folder or
track is being selected or during
fast forwarding/reversing.
– Select the repeat play range
again.
A subfolder is not played back.
 Subfolders cannot be played when
[FLD] (folder repeat) is selected.
– Select another repeat play range.
The sound is intermittent.
 You are using a device, such as a
cellular phone, that may cause
audible interference.
– Move electrical devices that may
be causing the interference away
from the unit.
19_815ME_QRD3603(B6_Horizon)

Error messages

Common
AMP ERROR
 This unit fails to operate or the
speaker connection is incorrect.
 The protective circuit is activated.
– Check the speaker connection.
– Turn the ignition switch OFF and
back to ON again. If the message
remains, contact your dealer or an
authorized Pioneer Service
Station for assistance.
NO XXXX (NO TITLE, for example)
 There is no embedded text
information.
– Switch the display or play another
track/file.
USB device/iPod
FORMAT READ
 Sometimes there is a delay
between the start of playback and
when you start to hear any sound.
– Wait until the message
disappears and you hear sound.
NO AUDIO
 There are no songs.
– Transfer the audio files to the USB
device and connect.
 The connected USB device has
security enabled.
17
En
MVH-S115UI