Publicidad
Idiomas disponibles
Idiomas disponibles
PC 4500
Warning
This appliance is not intended for use by persons (including children) with reduced physical,
-
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
-
WARNING: In order to ensure your children's safety, please keep all packaging (plastic bags,
-
boxes, polystyrene etc.) out of their reach.
Do not repair the device yourself, but rather consult an authorized expert.
-
Use the device only for the intended purpose.
-
Caution
Make sure your hands and the appliance are dry when you insert the batteries.
-
A microwave oven or a mobile phone may cause interference, which can lead to unreliable
-
weighing results.
Use the scale at a safe distance of at least 1.5 meters from a working microwave oven, or
-
switch off the microwave oven.
Specifications
1. Zero / Tare
2. Low power / overload indication
3. LCD digit height: 0.35'' (9mm)
4. 50kg / 110lb
5. 50g / 0.1lb
6. Power: 1x3V lithium cell (CR2032)
Key illustration
Switch on / off, conversion weight unit, zero / tare
Weighing
1. Strap the webbing belt through the luggage handle, and secure the hook of the belt onto the
triangle ring.
2. Press button to switch on the scale before lifting (ensure no stress). You will hear 2 beeps after
switching on.
3. When display does not show zero, press button to reset LCD to zero.
4. Lift the scale gently. Make sure the scale is horizontal and balanced. LCD shows the weight of luggage.
Wait for the weight reading to stop and stabilize, flash 3 times and locked. You will hear 2 beeps after
locking on.Usually weight reading will be locked in 2-3 seconds. It will be longer if the weighing object is
heavy.Scale will display weight
reading for 2 minutes and automatically switch off.
5. When weight reading is locked, press button to reset LCD display to zero. You will hear 1 beep. Then
you can start new weighing.
6. Press button for 3 seconds to switch the scale off.You will hear 1 beep after switching off.
To convert weight unit
When the scale is power off, press button for about 3 seconds, LCD shows zero and the weight unit is
flashing. Press button to select weight unit. After idle for 3 seconds, the weight unit is set and you can
start weighing.
Warning indicators
1. Replace new battery.
2. Scale overload. Remove item to avoid damage.Max.weight capacity is
indicated on the scale.
ENGLISH
5
Publicidad
