Cool Level; Ionic Function; Drying And Styling Hair; Cleaning - Silvercrest SHTR 2200 A1 Instrucciones De Uso

Ocultar thumbs Ver también para SHTR 2200 A1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Cool level

With the cool level button
a cold air stream with every combination of air and
heat levels.

Ionic Function

With the Ion switch
r
in the ionic function with every combination of blower
and heat level combinations.
When drying hair using a "normal" hair dryer, the
hair tends to charge itself with static and then begins
to "fly".
The ionic function generates negatively charged
ions. These are brought to the hair by the air flow.
Thereby, the positive static charge in the hair is
neutralised and voided. The hair will be soft,
supple, shiny and easier to style.

Drying and styling hair

To quickly dry hair, we recommend first of all
using a high blower and heater setting for a
short period. Also, place the ion switch at the
position
on "
r
switch to a lower blower and heat level to shape
the hairstyle.
With the supplied concentrator
the air flow specifically for styling:
• Place the concentrator
dryer: Ensure that one of the plastic latches on the
concentrator
engages into the guide rail on the
q
hair dryer. Turn the concentrator
seated and clicks into place.
Turn the concentrator
and pull it away to the front if you want to use
a wider air stream.
you can create
u
you can additionally switch
". After drying the hair,
q
you can utilise
q
on the front of the hair
q
until it is firmly
in the opposite direction
q
If you wish to dry your hair particulary gently, or for
the so-called "air-dryed permanent wave", use the
finger diffusor
.
i
For this, first of all remove the concentrator
and then replace it with the finger diffusor
• Ensure that one of the plastic latches on the finger
diffusor
engages into the guide rail on the
i
hair dryer. Turn the finger diffusor
engages and sits firmly.
Before you comb your hair out allow it to cool,
so that the styling retains its form.
To cool your hair you can use the button
or level 1 of the heat setting switch
Attention!
First pack and transport the hair dryer when it
has completely cooled down.
Otherwise it could damage other items.

Cleaning

Danger of electric shock
ALWAYS remove the plug from the power socket
before cleaning the hair dryer.
Danger of an electrical shock!
After being cleaned, the hair dryer must be
completely dry before using it again.
Cleaning the housing
To clean the housing, use a soft cloth moistened
with a mild soapy solution.
- 22 -
q
:
i
until it
i
u
.
y

Publicidad

Tabla de contenido
loading

Tabla de contenido