Malfunctions - HSM 411.2 Instrucciones De Servicio

10. Malfunctions

If the paper shredder does not work properly, please check the following points before
contacting our customer service:
• Is mains plug inserted?
• Is paper shredder switched on?
• Are the paper shredder door and
inspection door closed?
• Is shredded material bag full?
• Is there a paper jam in the paper shredder?
• Is the motor overloaded?
Paper jam (too much paper input)
Paper shredder jammed
• Red LED on membrane keyboard lights
• Paper shredder reverses automatically
Pull paper out of the paper feeding opening
If material is not completely pushed out, then
Press dashed arrow button
• Paper is pushed out
Pull paper out
The cutting device is easily accessible once the inspection door on the top
of the machine is opened.
CAUTION!
Injuries by cutting rollers are possible even when the paper shredder is idle.
Keep hands away from the cutting system when running!
Separate paper stack and feed paper again
• The shredding process is started by a photo–cell in the paper feeding
opening
CAUTION !
Do not press dashed arrow button and green arrow button alternately
forwards and backwards
Cutting system can be damaged
01/02
Paper shredder
GB
Insert mains plug
Switch shredder on
Close door and inspection door
Empty bag
Clear paper jam
Allow motor to cool down for
approx. 15–20 min.
HSM 411.2
23