Skil 5280 Manual Del Propietário página 17

Bevel adjustment
Disconnect plug from power source. The foot
can be adjusted up to 45° by loosening the
bevel adjustment wing nut at the front of the
saw. Align to desired angle on calibrated quad-
rant. Then tighten bevel adjustment wing nut
(Fig. 6).
WARNING
blade engagement in the work and
decreased stability of the foot, blade
binding may occur . Keep the saw steady
and the foot firmly on the workpiece.
Using the laser line guide
Your tool is equipped with a laser line guide
that will turn on whenever the tool is plugged in
and the laser button is pushed in (Fig. 1).
The laser line is pre-set at the factory to the
kerf of the blade supplied with your saw.
If using the laser line guide for cutting you do
not need the line guide incorporated in the foot
as it may be in a different setting than the laser
line guide.
The laser light guide is a class IIIA laser with
a maximum output power of 5.0 mWatts and
conforms to 21 CFR 1040.10 and 1040.11.
LASER RADIATION . AVOID
DANGER
DIRECT EYE EXPOSURE .
DO NOT stare into the laser light source . Never aim light at another person or object
other than the workpiece . Laser light can damage your eyes.
WARNING
operation of the tool.
Because of the
increased amount of
DO NOT use tinted glasses to enhance the laser light . Tinted glasses
will reduce overall vision for the application and interfere with the normal
Fig. 6
Fig. 7
Bevel
Adjustment
Wing Nut
Quadrant
17