Sammic SmartVide 5 Manual De Instrucciones página 12

EN
FIRMWARE UPDATE: Update software on the SmartVide
Follow the instructions below to update the software of SmartVide 5, 7 and 9 devices.
1.- Machine off
2.- Hold "-" and "Timer" while starting the device.
3.- Hold the buttons until the BOOTLOADER screen appears.
4.- The screen will go off after 5 seconds. The machine is ready
to begin the software update process.
5.- Open the Sammic SVide Bootloader app on the mobile
device.
6.- Start the search and choose the desired SmartVide 5/7/9
machine.
7.- Download the latest version of the Firmware.
8.- Update Firmware. The process will take a few minutes.
9.- Upon completion of the update process, close the app and
switch the SmartVide device off. The machine is now ready to
operate with the latest version.
- 12 -