Charging The Battery; Installing The Monitor - Extel O’PLUS Instrucciones De Uso

Ocultar thumbs Ver también para O’PLUS:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
5 -
> Used to scroll through the menu, to set the volume and brightness and to switch from play mode to pause
mode
6 - OK
7 - Light indicator: OFF/charging (red)/ON(green)
8 - On/Off
9 - Housing for the Micro SD card
10 - Video/Audio output
11 - 12 V
Power supply
Description of the symbols
1 - Selected camera N° (Cam)
2 - Recording in progress
3 - Signal level
4 - Selected display mode (Screen)
5 - Sound level
6 - Battery charge level
4. INSTALLATION
a. Charging the battery
WARNING
When connecting the monitor for the fi rst time, the battery must be recharged for 8 hours.
1 Connect the 12V
2 Plug the adapter into a power outlet and leave it plugged in for about 8 hours to charge the battery.
(the indicator lights red and then switches to green when the battery is charged) (fi g B - n°7).
3.Use without the adapter: 3 hours autonomy using a lithium battery
• Battery charge status display
When the battery is almost fl at,
the
symbol displays on the monitor screen.
If the monitor is not recharged it switches off automatically
until it is connected back to a mains power outlet.
b. Installing the monitor
Select a location away from reinforced concrete walls, mirrors, metal shelves, etc. Place the monitor at a distance
from any devices that create strong electric interference. Any strong electric environment can cause interference
and disrupt use (especially WIFI).
1. Insert a Micro SD card into the card reader (fi g C - n°1) (1Gb minimum - 32Gb maximum)
2. Unfold the stand behind the monitor and place it on a fl at surface
3. Connect to the mains power supply (fi g C - n°2)(or use the monitor powered by the battery once it has been
recharged)
4. Unfold the antenna (fi g B - 12)
GB3
+ /
/
-
/
+
/
-
/
(Fig. F)
7 - Card (Micro SD) inserted
8 - Movement detection activated
9 - Video format
10 - Continuous recording (when the card is full the 1
recorded fi les are overwritten)
11 - Date and time
adapter cable to the "power supply" socket on the monitor (fi g C - n°2)
(fi g.C)
CFI EXTEL O'PLUS - 10/2015 - V1
Signal status
Battery charge status
Perfect signal
Battery fully charged
3h
autonomy
Signal correct
Battery
suffi cient
Weak signal
Battery
low
No signal
Battery
fl at
st

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Jlt-808Jlt-808tJlt-808r

Tabla de contenido