Calling Up A Program; Starting The Firing Process - Rohde TC304 Manual De Instrucciones

Calling up a program

The TC 304 can store 5 firing curves (i .e . programs) . The manufacturer has preset the
programs to standard firing curves, which you can modify .
The preset programs are suggestions and have to be adjusted to the materials you
are using:
Prog. Description
No .
01 Drying 150°C
02 Bisque firing 850°C
03 Earthenware 1050°C 0
04 Earthenware 1150°C 0
05 Stoneware 1250°C
In the following example we will call up the
firing curve program No . 4 and start the firing
process .
After switching on the TC 304 the red
display shows the current temperature .
Briefly press the prog key until program No .
4 is displayed .
The display now switches to the final tem-
perature of the selected program .

Starting the firing process

In order to start the program, please press
the Start key . The green LED light in the
Start / Stop key is now on . The red display
shows the current kiln temperature .
The green LED light in the Start / Stop key
indicates a running firing process .
16
t0 Rmp1
(°C/h) (°C/h)
0 50
0 80
100
100
0 100
Note:
Tmp1 Rmp2
(°C) (°C/h)
150 skip
600 100
300 130
300 130
300 130
Tmp2 t2
(°C) (min)
150 10
850 5
1050 20
1150 20
1250 20
Rmp3
(°C/h)
skip
skip
skip
skip
skip