Usb Operation; Aux In Operation - Roadstar RCR-4625NU Manual De Instrucciones

5 English

USB OPERATION

1. Select "USB" mode by pressing the [FUNCTION] (2) button;
2. Plug an USB device into the [USB SOCKET] (16);
3. Playback will start automatically from the first track.
4. During the playback of MP3 disc, you can press and hold [PRESET/FOLDER/
STOP] (4)button, the display will show "FOLd" then press [SKIP+/-] (5/6) button to
choose folder
PROGRAMMING
The PROGRAMMING operation is the same as that of CD-MP3.
Note: Some mp3 player may not be able to play via the usb socket. this is not a maul-
function of the system.
Note: To avoid damage to USB memory, remove it only when the radio is turned off.

AUX IN OPERATION

1. Select "AUX" mode by pressing the [FUNCTION] (2)button;
2. Use one male to male 3.5mm jack cable (not included) to connect any external
audio device to the AUX-IN socket (17).
Note: Music control (play, pause, etc) must be done from your external device.