If The Oven Is To Switch On And Off Automatically - Lynx 4HT-429 X Instrucciones De Uso

If the oven is to
switch on and off
automatically
Perform the settings as
described in steps 1 to 4.
5.
Press the j clock button
until the ! end symbol
flashes.
In the display you will see
the time when the meal
will be ready.
6.
Use the rotary knob to set
a later end time.
The setting is adopted
after a few seconds. The
display will show the end
time until the oven
switches on.
The cooking time has
elapsed
Note
Please remember that easily spoiled foods must not
be allowed to remain in the oven for too long.
Example: Imagine it's 10:45 a.m. The meal will take
45 minutes to cook and must be ready at 12:45 pm.
A signal sounds. The oven switches off. Switch off the
function selector.
You can change the setting while the symbol is
flashing. The setting has been adopted if the symbol
lights up permanently. You may change the waiting
time that elapses before the setting is adopted. See
the Basic settings section for more details.
15