Care And Cleaning; Oven Exterior; Oven - Lynx 4HT-429 X Instrucciones De Uso

Care and cleaning

Oven exterior

Appliances with stainless
steel fronts
Cleaning clock faces

Oven

Switching on the oven light
Removing the oven
carriage
22
Do not use high pressure cleaners or steam jets.
Wipe the oven with water and a little washing up
liquid. Dry it with a soft cloth.
Caustic or abrasive substances are not suitable. If any
such substances come into contact with the frontage,
wipe it off immediately with water.
Slight differences in the colours on the appliance front
are caused by the use of different materials, such as
glass, plastic and metal.
Always remove any flecks of limescale, grease,
cornflour and egg white immediately. Corrosion can
form under such flecks.
Use stainless steel care products. Follow the
manufacturer's instructions. Try out the product on a
small area first, before using on the whole surface.
Clean clock faces with a gentle cloth or kitchen paper.
Apply only water and a little washing up liquid. Never
dry-clean.
All abrasive products, scourers and hard sponges
scratch the surface of the face.
Do not use coarse scouring pads or cleaning
sponges. You should only use oven cleaners on the
enamelled surfaces of the oven.
To facilitate cleaning
you can switch on the oven light and remove the oven
carriage
Set the function selector to t.
Pull the oven carriage out to the stop, raise it slightly,
then pull it out and store it carefully.