Seal; Replacing The Oven Light - Lynx 4HT-429 X Instrucciones De Uso

Seal

Replacing the oven
light
Method
Method
Clean the seal on the oven with washing up liquid.
Never use caustic or abrasive detergents.
If the oven light fails, it must be replaced.
Heat-resistant spare bulbs can be obtained from the
after-sales service or specialist shops.
Only use these bulbs.
1.
Disconnect the appliance from the mains.
2.
Place a tea towel in the cold oven to prevent
damage.
3.
Unscrew the glass cover by turning it anti-
clockwise.
4.
Replace the oven light with one of the same type.
5.
Screw the glass cover back on.
6.
Remove the tea towel and connect the appliance
from the mains.
1.
Switch off the oven fuse in the fuse box.
2.
Place a tea towel in the cold oven to prevent
damage.
3.
Remove the glass cover. To do this, open the
glass cover at the bottom with your hand.
Figure A.
If the glass cover is difficult to remove, use a spoon
to help you.
25