Wiring - Oscartielle POLARIS D Instrucciones De Uso

Polaris D - Mini Polaris D
English
multiplex up to 3 cabinets on the same electrical and refrigeration supply line (1 master +
2 slaves)
before connecting the cabinet to the electrical line, make sure that the rating plate data
matches the characteristics of the electrical system to which the cabinet must be
attached.
if the cabinet is moved to another located, repeat levelling,
incorrect levelling leads to incorrect operation of the cabinet
Level the cabinet both in front and back
DO NOT place the cabinet:
in areas at risk of explosion
in open air and therefore subjected to atmospheric agents;
near heat sources (direct sunlight, heating systems, incandescence lamps, etc.)
near air currents (near doors, windows, air-conditioning systems, etc.) that exceed
a speed of 0.2 m/s
Firts cleaning gently remove the protective film, eliminate glue residues with suitable
solvents
carry out the first cleaning using neutral products, dry with a soft cloth
ATTENTION! Abandoned packaging parts. Injuries.
DO NOT leave parts of the package (nails, wood, paper clips, etc. ) and tools used for the
operation (pliers, scissors, etc. ), on the work area.
These objects must be removed with appropriate means and brought to their respective
collection places.
i
For correct disposal
The package is composed of: Wood - Polystyrene - Polythene - PVC - Cardboard.

13. Wiring

DANGER! Live parts. Electrocution.
REMOVE THE ELECTRIC POWER SUPPLY BEFORE ANY OPERATION!
- check that the casing does not come into contact with the electrical panel
- check that the connections of various lighting systems (floors, roof, suspended
structure) are regularly inserted and locked into their plugs to avoid disconnections
during cleaning and maintenance
Provide a suitable grounding system!
i
The systems must be set up in accordance to the norms that regulate manufacture,
installation, use, and maintenance foreseen by the norms in force in the country where
the cabinet is installed.
To ensure normal operation, the maximum variation of the voltage must range between
+/- 6% of the nominal value.
Customer
Liability
Installer
OSCARTIELLE
56
DO NOTuse alcohol to clean the parts in methacrylate (Plexiglas).
DO NOT use abrasive substances or metal sponges
provide a power line to the cabinet connection point.
provide the anchoring devices for all the wires in input and
output to/from the cabinet.
OSCARTIELLE denies all liability with respect to the user or
third parties for:
- damages caused by failures or malfunction of the
systems installed upstream of the cabinet
- damages to the cabinet due to causes arising directly
from malfunction of the electrical system
05060144 01 22/08/2014