Read this manual carefully before using your sauna for the first time.
We recommend you keep it in a safe place for future reference.
•
Install the sauna on a perfectly flat surface.
•
The sauna must remain in a dry area. Do not use it near a source of water (bath, damp floor, swimming pool).
•
Do not use liquid cleaning products. Disconnect the sauna before cleaning and use a wet rag (see Maintenance section).
•
Protect the sauna's electrical cable to avoid it being crushed or pinched.
•
Prior to replacing certain components, ensure that they are specified by the manufacturer or that they have the same features
as the original parts. Incorrect replacement can cause a fire, a short circuit or damage to the sauna. We strongly recommend
using a qualified technician.
•
To avoid the risk of burns or electric shocks, do not use any metal tools and do not touch the infrared emitters.
•
Do not put animals in the sauna.
•
Do not dry linen in the sauna (fire hazard).
•
Do not leave the sauna switched on without supervision.
•
Do not leave the sauna switched on for more than 3 hours at a time to avoid premature deterioration of the equipment. After 3
hours continuous usage, switch off the sauna for at least one hour.
•
We recommend that you do not install a locking system on the sauna door.
•
Check compliance of your electrical installation prior to connecting your sauna to the power supply.
4
Recommendations