Technical Features - Fermax LOFT DUOX Manual De Instalador

L L L L L OFT DUO L L L L L OFT DUO OFT DUO OFT DUOX X X X X OFT DUO OFT DUO OFT DUOX X X X X OFT DUO OFT DUO
OFT DUO
If Panic Mode is configured in the Guard Unit, Panic Call mode is automatically configured
in the monitors. Upon deactivating this mode in the guard unit, it also deactivates the
monitors.
When you press the F1 button you send a Panic command via the bus. Besides, the F1
terminal acts as an input so that when you connect a button to it, when pressing it you
send a panic command to the guard unit.
Note: If you want to use a relay ref. 2013 to control a device via the F1 button, you need
an additional 18Vdc power source.
Button Menu: Settings and configuration.
MENU
· To access the:
- Administrator menu when the monitor is not programmed. From this menu, you can
program the monitor according to your installation needs
- User Menu (once the monitor is programmed). From this menu, you can access the
user's settings to personalise them.

TECHNICAL FEATURES

F1
MENU
Operating Temperature
Humidity
OSD screen 3.5" TFT
Resolution
Dimensions
Page 6
Power Supply
Consumption
Standby
audio + video
18 Vdc
25 mA
250 mA
[-5, +40 °C]
(5% - 95%):
Hor.: 320 Line TV
Ver: 240 Line TV
221 x 203 x 61 mm
8.7" x 7.9" x 2.4"