Tectro R232TC Instrucciones De Uso página 19

Always refer to your local dealer for the right fuel for your heater.
B MANUAL
A
INSTALLING THE HEATER
1 Carefully remove your heater from the box and check the contents.
In addition to the heater you also need to have:
E a transportation cap
C
E these directions for use
Keep the box and the packaging materials (Fig. A) for storage and/or
transportation.
2 Remove the other packaging materials:
E Release the right side of the grill. Lift the grill from the slot (Fig. B) and pull
D
it forward.
E Pull both ends of the packaging to the sides and at the same time slightly
downwards (see Fig. C).
E Remove the combustion chamber from the heater and remove the
packaging underneath (see Fig. D).
E Put the combustion chamber back into its place. The combustion chamber
is positioned correctly when it can be smoothly moved a little to the left
E
and to the right by its handle E (Fig. F). Close the grill: Slightly lift it to
reposition it in its slot.
E Open the lid of the removable tank 8 and remove the piece of cardboard.
3 Fill the removable tank as indicated in Section B.
4 Insert the batteries into their holder L at the back of the heater (Fig. G).
Ensure that the positive and negative poles match the + and - marks indicated
on the battery housing. Close the battery cover.
A
E E E E E E
cardboard.
cardboard.
cardboard.
cardboard.
4
19
R 125 E 1998 / 1999