Loading For Non-Peel Mode - PATHFINDER 6057 Referencia Rápida

5. Place a roll of supply in the supply holder so it unrolls from
the bottom.
6. Load the supplies for the printing mode you want: Peel or Non-
Peel.

Loading for Non-Peel Mode

1. Feed the supply over the platen roller, peel bar, and label
deflector.
2. Close the supply cover.
3. Touch the Home key on the display, then
select Load Supply, Calibrate Stock.
4-EN
Platen Roller
(black rubber)
Peel Bar
(metal)
Label
Deflector