Error Codes - PATHFINDER 6057 Referencia Rápida

Error Codes

Following are some common error codes you may receive. See
your System Administrator if you receive any codes not listed
here.
Code(s)
004 – 005
267 – 271
410 – 413
703 – 704
750
751 – 753
756
757
758
762
763
768
790 – 791
904 – 911
SYSTEM
ERROR
VECTOR ##
Description
Supply size is incorrect. Reload the correct
supplies.
Communication error. See your System
Administrator.
Load supplies or make sure they are loaded
correctly.
Printhead is overheated. Turn off the printer to let
it cool.
Check the supplies to see if they are loaded
correctly.
The printer is out of supplies. Load supplies.
The calibrated supply length differs by plus or
minus .25 inches from the format. Load supplies.
Check supply. Remove any printed labels. Check
for a label jam. Clear the supply path or reload
supplies.
Low battery. Recharge the battery.
Waiting to dispense label. Press the trigger.
Printhead error. See your System Administrator.
Turn off the printer. Wait two seconds and turn it
back on.
System error. See your System Administrator.
System error. See your System Administrator.
EN-9