Cleaning The Printhead, Black Mark Sensor, And Platen Roller; Cleaning The Scanner Window And Display - PATHFINDER 6057 Referencia Rápida

C l e a n i n g t h e P r i n t e r
When cleaning the printer, do not use sharp objects, do not use
household cleaners, use isopropyl alcohol on the interior areas
only (except where specified), never on the exterior. The printer
should be turned off and supplies removed when cleaning.
Cleaning the Printhead, Black Mark Sensor, and
Platen Roller
1. Check the supply holder for adhesive buildup; clean it if
necessary.
2. Ground yourself by touching a metal object, other than the
printer, to prevent electrostatic discharge, which may damage
the printer.
3. Clean the printhead area using a Monarch Cleaning Pen
(#114226) or a soft cloth moistened with isopropyl alcohol.
Allow the printer to dry before reloading supplies.
Label
Deflector
4. Clean the black mark sensor with a dry cotton swab.
5. Clean the platen roller with a dry, soft-bristle brush (such as a
toothbrush) when you see significant adhesive build-up or when
a label is wrapped around the platen roller.
6. Reload supplies, close the label deflector and supply cover.

Cleaning the Scanner Window and Display

1. Turn off the printer.
2. Moisten a soft cloth with distilled water.
3. Wipe the scanner window and the display screen until they are
clean.
Black Mark
Platen
Sensor
Roller
Printhead
EN-7