DESCRIPTIon oF THE unIT
BCS CERAmIC muLTIPoSITIon
5
1
2
6
PRoGRAmS
FIRMNESS
PROG 1
Pulse rate = 70Hz
ON time = 2.5 seconds
OFF time = 2.5 seconds
Ramp Up and Down = 2 seconds
Program timer = 20 minutes
MUSCLE CARE
PROG 2
Pulse rate = 60 Hz
ON time = 3.5 seconds
OFF time = 3.5 seconds
Ramp Up and Down = 2 seconds
Program timer = 26 minutes
"ACHIEVInG An ADEQuATE muSCLE ConTRACTIon"
The most suitable effect is reached when you detect that the sensitivity of your muscle responds to the stimulation coming from
the BCS Ceramic Multiposition device, so that :
- You can feel the contraction
- You can see the contraction
- The contraction is palpable
In any case you must not feel a discomfort
CuSTomER SuPPoRT: 00 33 2 32 96 50 50
10
1
4
- Indicator of power level
2
- Power key (Output A)
+ : increase power / level 0 to 64
9
- : decrease power / level 64 to 0
3
- Power key (Output B)
3
+ : increase power / level 0 to 64
- : decrease power / level 64 to 0
4
- LCD Display
8
5
- Program indicator
6
- Program selection key
7
7
- ON/OFF key
8
- Disconnection warning light:
blinks when the belt (or the panty) is disconnected.
9
- Battery charge warning light :
the 6
segment blinks : batteries are low
th
the10
segment blinks : batteries are used
th
MUSCLE FORCE
PROG 3
Pulse rate = 50 Hz
ON time = 4.5 seconds
OFF time = 4.5 seconds
Ramp Up and Down = 2 seconds
Program timer = 30 minutes
MASSAGE
PROG 4
Pulse rate = 50 Hz
ON time = 5.5 seconds
OFF time = 5.5 seconds
Ramp Up and Down = 2 seconds
Program timer = 40 minutes