Torque Specification - Jacobsen AR-522 Manual De Piezas Y Mantenimiento

3.10 TORQUE SPECIFICATION ___________________________________________________

All torque values included in these charts are approximate and are for reference only. Use of these torque values is
at your sole risk. Jacobsen is not responsible for any loss, claim, or damage arising from the use of these charts.
Extreme caution should always be used when using any torque value.
Jacobsen uses Grade 5 Plated bolts as standard, unless otherwise noted. For tightening plated bolts, use the value
given for lubricated.
SIZE UNITS GRADE 5
Lubricated
#6-32 in-lb (Nm) –
#8-32 in-lb (Nm) –
#10-24 in-lb (Nm) –
#10-32 in-lb (Nm) –
#12-24 in-lb (Nm) –
1/4-20 in-lb (Nm) 75 (8.4)
1/4-28 in-lb (Nm) 85 (9.6)
5/16-18 in-lb (Nm) 157 (17.7)
5/16-24 in-lb (Nm) 173 (19.5)
3/8-16 ft-lb (Nm) 23 (31.1)
3/8-24 ft-lb (Nm) 26 (35.2)
SIZE UNITS
Lubricated
M4 Nm (in-lb) –
M5 Nm (in-lb) 1.80 (16)
M6 Nm (in-lb) 3.05 (27)
M8 Nm (in-lb) 7.41 (65)
M10 Nm (ft-lb) 14.7 (11)
M12 Nm (ft-lb) 25.6 (19)
M14 Nm (ft-lb) 40.8 (30)
AMERICAN NATIONAL STANDARD FASTENERS
GRADE 8
Dry Lubricated
20 (2.3) –
24 (2.7) –
35 (4.0) –
40 (4.5) –
50 (5.7) –
100 (11.3) 107 (12.1)
115 (13.0) 120 (13.5)
210 (23.7) 220 (24.8)
230 (26.0) 245 (27.6)
31 (42.0) 32 (43.3)
35 (47.4) 37 (50.1)
METRIC FASTENERS
4.6 8.8
Dry Lubricated
– –
2.40 (21) 4.63 (41)
4.07 (36) 7.87 (69)
9.98 (88) 19.1 (69)
19.6 (14) 37.8 (29)
34.1 (25) 66.0 (48)
54.3 (40) 105 (77)
NOTICE
SIZE UNITS
Dry
– 7/16-14 ft-lb (Nm)
30 (3.4) 7/16-20 ft-lb (Nm)
45 (5.1) 1/2-13 ft-lb (Nm)
50 (5.7) 1/2-20 ft-lb (Nm)
65 (7.3) 9/16-12 ft-lb (Nm)
143 (16.1) 9/16-18 ft-lb (Nm)
163 (18.4) 5/8-11 ft-lb (Nm)
305 (34.4) 5/8-18 ft-lb (Nm)
325 (36.7) 3/4-10 ft-lb (Nm)
44 (59.6) 3/4-16 ft-lb (Nm)
50 (67.8) 7/8-14 ft-lb (Nm)
10.9
Dry Lubricated
– –
6.18 (54) 6.63 (59) 8.84 (78)
10.5 (93) 11.3 (102) 15.0 (133)
25.5 (226) 27.3 (241) 36.5 (323)
50.5 (37) 54.1 (40) 72.2 (53)
88.0 (65) 94.5 (70) 125 (92)
140 (103) 150 (110) 200 (147)
ADJUSTMENTS
GRADE 5
Lubri- Dry
cated
37 (50.1) 50 (67.8) 53 (71.8)
42 (56.9) 55 (74.6) 59 (80.0)
57 (77.2) 75 (101) 80 (108)
64 (86.7) 85 (115) 90 (122)
82 (111) 109 (148) 115 (156)
92 (124) 122 (165) 129 (174)
113 (153) 151 (204) 159 (215)
128 (173) 170 (230) 180 (244)
200 (271) 266 (360) 282 (382)
223 (302) 298 404 315 (427)
355 (481) 473 (641) 500 (678)
12.9
Dry Lubricated Dry
– 3.83 (34) 5.11 (45)
7.75 (68) 10.3 (910
13.2 (117) 17.6 (156)
32.0 (283) 42.6 (377)
63.3 (46) 84.4 (62)
110 (81) 147 (108)
175 (129) 234 (172)
3
GRADE 8
Lubri- Dry
cated
70 (94.9)
78 (105)
107 (145)
120 (162)
154 (209)
172 (233)
211 (286)
240 (325)
376 (509)
420 (569)
668 (905)
Non Critical
Fasteners
into
Aluminum
2.0 (18)
4.0 (35)
6.8 (60)
17.0 (150)
33.9 (25)
61.0 (45)
94.9 (70)
13