Power Source; Connecting Your Recorder To A Tv - Insignia NS-1DRVCR Guia Del Usuario

Grabadora dvd/vcr
Ocultar thumbs Ver también para NS-1DRVCR:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Do not remove any labels or stickers on the
back panel of your recorder.
Place your recorder in the location you want.
Your recorder is designed to be used on a
level, stable, flat surface, such as a table,
desk, shelf, or stand convenient to a power
outlet, out of direct sunlight, and away from
sources of excess heat, dust, moisture, or
vibration.
Unwind the AC power cord and extend the
cord to its full length, then plug it into the back
of the recorder.

Power source

Use the polarized AC line cord provided for
operation on AC power. Insert the AC cord plug
into a standard 120 V 60 Hz polarized AC outlet.
If you cause a static discharge when touching
your recorder and your recorder fails to function,
unplug your recorder from the AC outlet and plug
it back in. Your recorder should return to normal
operation.
Warnings
• The system uses a polarized AC plug with one
wide blade and one narrow blade. The plug will
only fit into matching polarized power outlets.
This is a safety feature to reduce the possibility
of electric shock. If the plug will not fit in your
power outlets, you probably have outdated,
non-polarized outlets which should be changed
by a qualified, licensed electrician. Do not file
the wide blade on the plug or use an adapter to
make the plug fit into your outlet. This defeats
the safety feature and could expose you to
electric shock.
• Never connect the AC cord plug to other than
the specified voltage (120 V 60 Hz). Use the
attached power cord only.

Connecting your recorder to a TV

• Make sure that the recorder is connected
directly to the TV, then tune the TV to the
correct video input channel.
• Do not connect the recorder's AUDIO OUTPUT
jack to the PHONO IN jack (record deck) of
your audio system.
• Do not connect the recorder through another
VCR. The DVD image could be distorted by the
copy protection system.
• The picture and sound of a nearby TV, VCR, or
radio may be distorted during playback.
Position the units away from each other or turn
off the unit after removing the disc.
Make one of the following connections,
depending on the capabilities of your TV.
10
Back of TV
Back of recorder
Back of TV
Video connection
To connect to your TV with a video cable:
Connect the VIDEO OUT jack on the
recorder to the VIDEO IN jack on the TV
using the video cable supplied.
S-Video connection
To connect to your TV with an S-Video cable:
Connect the S-VIDEO OUT jack on the
recorder to the S-VIDEO IN jack on the TV
using an optional S-Video cable.
Component video/progressive scan connection
If your television is a high-definition or "digital
ready" television, you can take advantage of the
recorder's progressive scan output for the
highest quality video possible.
To connect to your TV with a component
video cable:
Connect the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks on the recorder to
the corresponding in jacks on the TV using
an optional Y Pb Pr cable.
Audio connection
To connect to your TV with audio source:
Connect the Left and Right AUDIO OUT
jacks on the recorder to the audio left and
right in jacks on the TV using the supplied
audio cables.
www.insignia-products.com
Y Pb Pr cable
COMPONENT/PROGRESSIVE SCAN
S-VIDEO
VIDEO INPUT
INPUT
Pr
Pb
Y
S-Video cable
Video
cable
If you use this connection, set the TV's
source selector to VIDEO.
• Set the resolution to 480p using the P/SCAN
button on the front panel.
• Progressive Scan does not work with the
Audio/Video or S-Video connections.
• If your TV does not accept the Progressive
Scan format, the picture will appear scrambled.
AUDIO INPUT
R
L
Audio
cable
Audio
cable

Publicidad

Tabla de contenido
loading

Tabla de contenido