KELCH TC100 Instrucciones De Servicio página 9

Brief instructions Micro / Pico LCD
1 Operation
Align the reference edge in the projector. Press the Zero button (11) and then the axis button
which is to be zeroed. In the example, the value for the Z values of the edges relates to the
setting gage, and the incremental value for the X value relates to the master edge.
Press axis to zero, or
press Zero again to
zero both axes.
Inc appears instead of Abs in the display.
Press the Absolute button (7) to exit incremental mode.
1.6 Probing Circle
Probe the circle by placing points on the cutting edge. Press the Probe Circle button (3).
Position the tool edge on the crosshairs. Press the Enter button (16) and move to the next
point on the edge. At least 3 points have to be set to ensure that the circle is probed. Press
the Finish button (15) once all the points have been set. The circle (14) is displayed.
1048180 © Kelch GmbH 2012
EN
Page 3 of 4